Table 3-1 Select And Set From The Front Panel - Xantrex Watt Series Programmable DC Power Supply XG 850 Operating Manual

Local Operation

Table 3-1 Select and Set from the Front Panel

9 Positions on the Mode
Control Knob
CAP (Current Analog
Programming)
VAP (Voltage Analog
Programming)
PGM (Remote Programming) Select the remote interface to be
3-4
Turning the rotary Adjust/Enter
control lets you...
Select the programming source and
select the range.
Select the programming source and
select the range.
used for control.
Pressing the rotary Adjust/
Enter control lets you...
Set the value selected and
cycle to the next setting.
Set the value selected and
cycle to the next setting.
Select interface and cycle to
the next setting.
M370078-01