Table of Contents
Advertisement
Installation
Inspection, Cleaning, and Packing
Inspection, Cleaning, and Packing
Initial
When you first receive your unit, perform a quick physical check.
Inspection
1. Ensure that each package contains the power supply and an AC input cord.
2. Inspect the unit for scratches and cracks, and for broken switches, connectors,
3. If you suspect internal damage, have a service technician check the unit.
If the unit is damaged, save all packing materials and notify the carrier immediately.
See packing instructions in
Periodic
No routine servicing of the power supply is required except for periodic cleaning.
Whenever a unit is removed from operation, clean the metal surfaces with naphtha
Cleaning
or an equivalent solvent and the front panel with a weak solution of soap and water.
Use low pressure compressed air to blow dust from in and around components on the
printed circuit boards.
32
and displays.
"Packaging for Shipping or
Operating Manual for XHR Series Power Supply
Storage".
Hide quick links:
Advertisement
Table of Contents
