Figure 5-9 Completing The New Hardware Wizard - Xantrex Watt Series Programmable DC Power Supply XG 850 Operating Manual

9. In the Locate Driver Files dialog box, in the field Optional Search
10. On the next screen, enter the file path "C:\FTDI" and click OK.
11. On the next screen, select "Driver Files Search Results" and click
12. In Completing the Found New Hardware Wizard, see Figure 5-9,

Figure 5-9 Completing the New Hardware Wizard

This completes the first part of the installation during which the USB to
serial converter is installed. The second part involves the installation of a
serial port, which should follow automatically once the converter
installation is complete. Installation of the serial port does not require any
user intervention.
Verifying Installation
Once the installation of the serial port has completed, verify that the
installation has been successful by looking under Device Manager of the
System Properties screen. The device should have installed as a USB
Serial Port (COMx) attached to USB High Speed Serial Converter.
M370078-01
Locations, select Specify A Location and click Next.
Next.
click Finish to complete the installation.
Hardware and Connection Setup
5
5-11