Auxiliary Auto Start Mode - Xantrex Watt Series Programmable DC Power Supply XG 850 Operating Manual

Auxiliary Auto Start Mode

The Auxiliary Auto Start mode determines the state of the auxiliary
output after a complete power cycle (all front panel LEDS are not
illuminated). With Auxiliary Auto Start mode turned to On, the auxiliary
output will be activated after the power supply is powered up again.
To define the Auxiliary Auto Start mode:
1. Press and hold the OUTPUT ENABLE Aux button for 1 second.
2. To change to status to On or Off, press the OUTPUT ENABLE Aux
The SCPI command (s) for these instructions are:
[:]OUTPut[<channel>]:AUXiliary:PowerON[:STATe]
M370078-01
AuAS On or AuAS Off is displayed.
button.
Auxiliary Auto Start Mode
3-17
3