Inspection, Cleaning, And Packaging; Initial Inspection; Periodic Cleaning - Xantrex XFR 2800 Operating Manual

Installation

Inspection, Cleaning, and Packaging

Inspection, Cleaning, and Packaging
Initial When you first receive your unit:
Inspection
1. Inspect the unit for scratches and cracks, and for broken switches, connectors,
2. Ensure that the packing box contains the AC input cover and strain relief kit (see
3. Have the service technician check the printed circuit board and its components
If the unit is damaged, save all packing materials and notify the carrier immediately.
See packing instructions on page 38.
Periodic No routine servicing of the power supply is required except for periodic cleaning.
Whenever a unit is removed from operation, clean metal surfaces with naphtha or an
Cleaning
equivalent solvent and the front panel with a weak solution of soap and water. Use
low-pressure compressed air to blow dust from in and around components on the
printed circuit boards.
36
and displays.
Figure 2.2).
if you suspect internal damage.
Operating Manual for XFR 2.8kW Series Power Supply