Installation
Inspection, Cleaning, and Packaging
Inspection, Cleaning, and Packaging
Initial
When you first receive your unit:
Inspection
1. Inspect the unit for scratches and cracks, and for broken switches, connectors,
2. Have the service technician check the printed circuit board and its components
If the unit is damaged, save all packing materials and notify the carrier immediately.
See packing instructions on
Periodic
No routine servicing of the power supply is required except for periodic cleaning.
Cleaning
Whenever a unit is removed from operation, clean metal surfaces with naphtha or an
equivalent solvent and the front panel with a weak solution of soap and water. Use
low-pressure compressed air to blow dust from in and around components on the
printed circuit boards.
28
and displays.
if you suspect internal damage.
page
29.
Operating Manual for XKW 3kW Series Power Supply