Voltage-Controlled Voltage Isol Setup - Xantrex Watt Series Programmable DC Power Supply XG 850 Operating Manual

Xg 850 watt series programmable dc power supply
Table of Contents

Advertisement

Analog Programming (APG) and Isolated Analog Programming (ISOL)

Voltage-Controlled Voltage ISOL Setup

Activating ISOL Programming Voltage Mode
Deactivating ISOL Voltage Mode
4-24
To activate ISOL programming voltage mode with an external
voltage source:
1. Turn the 9-position mode control to the VAP position or press the
rotary Adjust/Enter control if the mode control is already at the
VAP position.
WAPr is displayed on the output voltage display.
2. Turn rotary Adjust/Enter control to select U IS (voltage source
from isolated connector).
3. Press the rotary Adjust/Enter control to commit the selected mode.
LE U is displayed on the output voltage display.
4. Select the input source level using the rotary Adjust/Enter control.
5. Once the desired level has been selected, press the rotary Adjust/
Enter control to commit the change.
The display will return to the normal display.
To deactivate the ISOL voltage mode:
1. Turn the 9-position mode control to the VAP position or press the
rotary Adjust/Enter control if the mode control is already at the
VAP position.
2. UAPr is displayed on the output voltage display.
3. Turn the rotary Adjust/Enter control to select nonE.
4. Press the rotary Adjust/Enter control to commit the change.
The display will return to the normal display.
M370078-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents