Section 2. Installation
Inspection, Cleaning, and Packaging
Inspection, Cleaning, and Packaging
Initial
When you first receive your unit, perform a quick physical check.
Inspection
1. Inspect the unit for scratches and cracks in the chassis and front panel, and for
2. If you see external damage or suspect internal damage, have a service technician
3. Ensure that the packing box contains the 7.5' (2.5 m) power cord.
Periodic
No routine servicing of the power supply is required, except for periodic cleaning.
Whenever a unit is removed from operation, clean the metal surfaces with naptha or
Cleaning
an equivalent solvent and the front panel with a weak solution of soap and water. Use
low-pressure compressed air to blow dust from components on the printed circuit
boards.
24
broken switches, connectors, and displays.
check the unit before attempting to use it. If the unit is damaged, save all packing
materials and notify the carrier immediately. See packing instructions in
"Returning Power Supplies to the Manufacturer" on page
25.
Operating Manual for XPD Series Power Supply