Adjusting 4-Corner; Enabling Auto Warp Filter; Adjusting Warp Filter; Resetting Geometry Correction Setting - Christie D13WU2-HS User Manual

Adjusting 4-corner

Use 4-corner to correct the four corners of the projector's display image.
1. Select Menu > Size & Position > Geometry Correction > 4-Corner.
2. Select the corner and the direction to adjust.
3. To move the corner, adjust the slider by arrow keys or press ENTER to input the value.
4. After inputting the value, press ENTER to apply.
5. To adjust the other corner or direction, repeat step 2 to 4.

Enabling auto warp filter

Improve the sharpness of the image and reduce the ghosting automatically after geometry
correction, such as keystone, pincushion, 4-corner, and warping.
1. Select Menu > Size & Position > Geometry Correction > Auto Warp Filter.
2. To enable the setting, press ENTER.

Adjusting warp filter

Improve the sharpness of the image after geometry correction, such as keystone, pincushion, 4-
corner, and warping. Adjust the warp filter manually to reduce the ghosting.
1. Select Menu > Size & Position > Geometry Correction > Manual Warp Filter.
2. To reduce the ghosting in different direction, select Horz Filter or Vert Filter.
3. Adjust the slider by arrow keys or press ENTER to input the value.
4. After inputting the value, press ENTER to apply.

Resetting geometry correction setting

Reset all geometry correction parameters back to default, including warp and blend settings.
1. Select Menu > Size & Position > Geometry Correction > Reset to Default.
2. Press ENTER.
HS Series 2K User Manual — D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-HS, D20HD-HS, D20WU-HS
020-001466-06 Rev. 1 (12-2022)
Copyright ©2022 Christie Digital Systems USA Inc. All rights reserved.
A A
B
B
A A
Adjusting the size and position
B
B
30