Optional Function Setting Mode - Daikin LXE10E-A Service Manual

https://daikin-p.ru

10. OPTIONAL FUNCTION SETTING MODE

<Key operation to enter/exit>
Power OFF
Circuit Breaker ON
Unit OFF
I/O ON
All indication
lights on
(for 3 sec.)
for 3 sec.
F. PTI
Starting
S. PTI
preparation
M. CHECK
(for 18 sec.)
※ 1
Current
indication
(Operation state)
<Key operation in this mode>
Whenever the key is pressed, the display changes.
S
Turn the power breaker OFF after the setting.
USDA SENSOR ON/OFF,
CARGO TEMPERATURE
SENSOR ON/OFF SETTING
S S
DEHUMIDIFUCATION
CONTROL ON/OFF
SETTING
A"(conducting behumidifying without humidity sensor) or "OFF" (conducting no dehumidifying) on the LED
while the LCD indicates "dHU".
Whenever the or
Press the key to determine the setting.
Note : This setting can be changed by
( I/O
I/O OFF
for 3 sec.
To set the USDA ON/OFF and CARGO TEMPERATURE SENSOR ON/OFF:
Select "OFF (not in use)", "3 (3 USDA probes are in use)", or "4 (3
USDA probes and 1 cargo temperature sensor are in use)" on the LED
while the LCD displays "USdA".
Whenever the
or "4" is changed.
Press the
Note: When two USDA probes are connected, the setting will be
determined automatically to "3" (3 USDA probes are in use).
To set the DEHUMIDIFICATION CONTROL:
Select "ON" (conducting dehumidifying with humidity sensor),"ON-
key is pressed, the indication of "ON","ON-A" or "OFF" is changed.
key. (Refer to page 3-12)
M
Circuit Breaker OFF
after setting change
OFF when no setting changed)
※ 10
Optional Function Setting
or key is pressed, the indication of "OFF" or "3"
key to determine the setting.
3-26