Daikin LXE10E-A Service Manual page 193

https://daikin-p.ru
2 Operation procedure flow chart
S When no power supply
Power OFF
Non operation for 30 sec.
Circuit Breaker ON
Unit OFF
I/O ON
All indication
light on
(for 3 sec.)
for 3 sec.
F. PTI
Starting
S. PTI
preparation
M. CHECK
(for 18 sec.)
S
※ 1
Current
indication
or non operation for 5 min.
(Operation state)
or non operation for 5 min.
MODE
M
CHART
CHART
※17 Logging data can be down loaded even when the power supply OFF, the unit OFF
I/O Unit On / Off key
Enter key
※ 3
Difference from
standard model
I/O OFF
for 3 sec.
※ 12 ※ 13
Optional
Function
Setting
※2 Operation Setting (Set Point Temperature˚C, Humidity %, Defrost Interval)
※9 Sensor Indication
※G-SET operation
(The energy consumption
reducing operation)
※7 Chart Indication
or the unit in operation.
To down load the data during the power supply OFF, press the
the wake-up battery.
S key Select key
S
8 / Chart key
CHART
Battery mode, Operation Condition Setting with back-up battery
(Set Point Temperature˚C / Humidity %, / Defrost Interval)
Circuit Breaker OFF
after setting change
( OFF when no settig change)
I/O
for 3 sec. for 3 sec.
※ 14
Basic
Function
Setting
※ 10 Temperature
Record Scroll
MODE
M
※4 Automatic
pump down
8-10
for 3 sec.
※ 15 ※ 16
Optional Container
Condition I.D & Time
Setting Setting
※ 11 Alarm
Record Scroll
MODE
M
※4 Dehumidification
ON-A･OFF setting
MODE
M
key for using
S
Difference from
standard model