Chapter 2 Configuration; Overview; Safety Messages - Emerson Rosemount 3051 Reference Manual

Reference Manual
00809-0100-4007
2 Configuration
2.1

Overview

This section contains information on commissioning and tasks that should be performed
on the bench prior to installation, as well as tasks performed after installation as described
in Configuring transmitter
This section also provides instructions on configuring with Field Communicator, AMS
Device Manager, and Local Operator Interface (LOI). For convenience, Field Communicator
Fast Key sequences are labeled Fast Keys, and abbreviated LOI menus are provided for each
function below.
Full Field Communicator menu trees and Fast Key sequences are available in
Communicator menu trees and fast
Interface
2.2

Safety messages

Procedures and instructions in this section may require special precautions to ensure the
safety of the personnel performing the operations.
WARNING
Explosions
Explosions could result in death or serious injury.
WARNING
Process leaks
Process leaks may cause harm or result in death.
WARNING
Electrical shock
Electrical shock can result in death or serious injury.
Reference Manual
diagnostics.
(LOI).
Before connecting a handheld communicator in an explosive atmosphere, ensure
that the instruments in the loop are installed in accordance with intrinsically safe or
non-incendive field wiring practices.
In an explosion-proof/flameproof installation, do not remove the transmitter covers
when power is applied to the unit.
Install and tighten process connectors before applying pressure.
Avoid contact with the leads and terminals. High voltage that may be present on
leads can cause electrical shock.
keys. LOI menu trees are available in
Configuration
August 2019
Field
Local Operator
9