Emerson Rosemount 3051 Reference Manual page 40

Configuration
August 2019
2.12.2 Selecting burst mode options in HART
The message content options are:
• PV only
• Percent of range
• PV, 2V, 3V, 4V
• Process variables and status
• Process variables
• Device status
2.12.3 Selecting a HART
When in HART 7 mode, you can select the following trigger modes
• Continuous (same as HART 5 burst mode)
• Rising
• Falling
• Windowed
• On change
Note
Consult host system manufacturer for burst mode requirements.
2.12.4 Configure burst mode using a Field Communicator
From the HOME screen, enter the Fast Key sequence.
Device Dashboard Fast Keys
2.12.5 Configure burst mode using AMS Device Manager
Complete the following steps to configure burst mode, in order to transmit dynamic data,
with AMS Device Manager.
Procedure
1. Right-click the device and select Configure.
2. Select the HART tab.
3. Enter the configuration in the Burst Mode Configuration fields.
40
®
7 trigger mode
2, 2, 5, 3
Reference Manual
00809-0100-4007
®
7
Rosemount 3051