Reference Manual
00809-0100-4007
Grounding transient protection terminal block
The transmitter can withstand electrical transients of the energy level usually encountered
in static discharges or induced switching treatments. However, high-energy transients,
such as those induced in wiring from nearby lightning strikes, can damage the transmitter.
You can order the transient protection terminal block as an installed option (option code
T1) or as a spare part to retrofit existing transmitters in the field. See the Spare parts
section of the Rosemount
symbol shown in
Figure 4-10: Transient Protection Terminal Block
A
A. External ground connection location
B. Lightning bolt connection
Note
The transient protection terminal block does not provide transient protection unless the
transmitter case is properly grounded. Use the guidelines to ground the transmitter case.
Refer to
Reference Manual
™
3051
Figure 4-10
identifies the transient protection terminal block.
Figure
4-10.
Product Data Sheet
for part numbers. The lightning bolt
B
Electrical installation
August 2019
81