Emerson Rosemount 3051 Reference Manual page 73

Reference Manual
00809-0100-4007
4.4.2 Set Simulate switch
The Simulate switch is located on the electronics. You can use it in conjunction with the
transmitter simulate software to simulate process variables and/or alerts and alarms.
To simulate variables and/or alerts and alarms, move the Simulate switch to the Enabled
position and enable the software through the host. To disable simulation, move the switch
to the Disabled position or disable the software simulate parameter through the host.
4.4.3 HART
The HART Lock prevents changes to the transmitter configuration from all sources; it
rejects all changes requested via HART, LOI, and local configuration buttons.
You can only set the HART Lock via HART communication in HART Revision 7 mode. You
can enable or disable the HART Lock with a Field Communicator or AMS Device Manager.
Configure HART
From the HOME screen, enter the Fast Key sequence.
Device Dashboard Fast Keys
Configure HART
Complete the following steps to enable or disable the HART Lock with AMS Device
Manager.
Procedure
1. Right-click the device and select Configure.
2. Under Manual Setup, select the Security tab.
3. Select the Lock/Unlock button under HART Lock (Software) and follow the screen
4.4.4 Configuration button lock
The Configuration button lock disables all local button functionality.
The transmitter will reject all changes to configuration from the LOI and local buttons. You
can only lock local external keys via HART
Configure Configuration button lock using a Field
Communicator
From the HOME screen, enter the Fast Key sequence.
Device Dashboard Fast Keys
Reference Manual
®
Lock
®
Lock using Field Communicator
®
Lock using AMS Device Manager
prompts.
2, 2, 6, 4
®
communication.
2, 2, 6, 3
Electrical installation
August 2019
73