Emerson Rosemount 3051 Reference Manual page 99

Reference Manual
00809-0100-4007
5.7.3 Switch HART
Complete the following steps to change the transmitter's HART revision with AMS Device
Manager.
Procedure
1. Select Manual Setup and select HART.
2. Select Change HART Revision; then follow the screen prompts.
5.7.4 Switch HART
Navigate to HART Rev within the extended menu and select either HART Rev 5 or HART
Rev 7.
Use Figure 5-8
Figure 5-8: Change HART Revision with LOI
VIEW CONFIG
ZERO TRIM
UNITS
RERANGE
LOOP TEST
DISPLAY
EXTENDED MENU
EXIT MENU
Reference Manual
®
revision with AMS Device Manager
®
revision with LOI
to change HART revision.
EXTENDED MENU
CALIBRAT
DAMPING
TRANSFER FUNCT
SCALED VARIAB
ASSIGN PV
TAG
ALARM SAT VALUES
PASSWORD
SIMULATE
HART REV
BACK TO MENU
EXIT MENU
Operation and maintenance
August 2019
99