Otto Bock Triton 1C61 Instructions For Use Manual page 18

2 Product description
2.1 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular connectors. Func-
tionality with components of other manufacturers that have compatible modular connectors has
not been tested.
2.2 Indications for use
The 1C61 Triton Vertical Shock is a Carbon Fiber Foot with integrated Shock Absorber and
Torsion unit.
The product is to be used solely for lower limb prosthetic fittings.
2.3 Service life
INFORMATION
This component has been tested according to ISO 22675 standard for two million load cycles.
Depending on the amputee's activity this corresponds to a duration of use of two to three years.
We recommend carrying out regular yearly safety checks.
2.4 Field of application
Our components perform optimally when paired with appropriate components based upon weight
and mobility grades identifiable by our MOBIS classification information and which have appro-
priate modular connectors.
1C61 = 21 – 24 cm
Recommended for amputees with Mobility Grade 3 and 4 (unrestricted outdoor walkers
and unrestricted outdoor walkers with particularly high demands).
Approved for patient weight of up to 100 kg (220 lbs).
1C61 = 25 – 30 cm
Recommended for amputees with Mobility Grade 4 (unrestricted outdoor walkers and
unrestricted outdoor walkers with particularly high demands).
Approved for patient weight of up to 125 kg (275 lbs).
1C61 = 25 – 30 cm
Recommended for amputees with Mobility Grade 3 (unrestricted outdoor walkers).
Approved for patient weight of up to 150 kg (330 lbs).
Please refer to the selection chart below to determine the appropriate stiffness required according
to Ottobock recommendations.
Foot Size
Patient Weight
21cm 22cm 23cm
kg lbs
40-47 88-103 1-0 Special Order – please contact Customer Ser-
vice
18 | Ottobock
Stiffness chart (spring – functional ring)
24cm 25cm 26cm 27cm
–
28cm 29cm 30cm
– – – – – – –