Fnc 09 - Next / End A For/Next Loop - Mitsubishi FX3U Series Programming Manual

FX /FX Series Programmable Controllers
3U 3UC
Programming Manual - Basic & Applied Instruction Edition
8.10 FNC 09 – NEXT / End a FOR/NEXT Loop
Outline
NEXT instruction specifies the end position of the loop.
1. Instruction format
FNC 09
NEXT
2. Set data
Operand type
–
3. Applicable devices
Bit Devices
Oper-
and System User
Type
X Y M T C S D .b KnX KnY KnM KnS T C D R U \G
–
Explanation of function and operation
The loop between FOR and NEXT instructions is repeated "n" times (which is specified by the source data).
After the loop is repeated by the specified number of times, steps after NEXT instruction are executed.
Related instruction
NEXT instruction and FOR (FNC 08) instruction are set as a pair in programming.
214
Mnemonic
Independent Inst.
1 step NEXT
There is no set data.
Digit Specification
FNC 08
S
FOR
FNC 09
NEXT
8.10 FNC 09 – NEXT / End a FOR/NEXT Loop
Operation Condition
This instruction is the independent type, and
Continuous
Operation does not require drive contact.
Description
Word Devices
Special
System User
Unit
V Z Modify K H
There are no applicable devices.
S
Repeated " "
times.
8 Program Flow – FNC 00 to FNC 09
Data type
Others
Con- Real Charac-
Index
stant Number ter String
E " "
–
Pointer
P