Fnc200 - Str / Bin To Character String Conversion - Mitsubishi FX3U Series Programming Manual

FX /FX Series Programmable Controllers
3U 3UC
Programming Manual - Basic & Applied Instruction Edition
26.1 FNC200 – STR / BIN to Character String Conversion
Outline
This instruction converts binary data into a character string (ASCII codes).
On the other hand, ESTR (FNC116) instruction converts floating point data into a character string.
1. Instruction format
FNC 200
D STR
2. Set data
Operand Type
S
1
S
2
D
3. Applicable devices
Bit Devices
Oper-
and System User
Type
X Y M T C S D .b KnX KnY KnM KnS T C D R U \G
S
1
S
2
D
598
Mnemonic
16-bit Instruction
P
7 steps STR
STRP
Head device number storing the number of digits of a numeric value to be
converted
Device number storing binary data to be converted
Head device number storing converted character string
Digit Specification
26 Character String Control – FNC200 to FNC209
26.1 FNC200 – STR / BIN to Character String Conversion
→ For character strings, refer to Section 5.3.
→ For ESTR (FNC116) instruction, refer to Section 18.4.
Operation Condition
32-bit Instruction
Continuous
13 steps
Operation
Pulse (Single)
Operation
Description
Word Devices
Special
System User
Unit
V Z Modify K H
Mnemonic Operation Condition
Continuous
DSTR
Operation
Pulse (Single)
DSTRP
Operation
Data Type
16-bit binary
16- or 32-bit binary
Character string
Others
Con- Real Charac-
Index
stant Number ter String
E " "
Pointer
P