Fnc 16 - Fmov / Fill Move - Mitsubishi FX3U Series Programming Manual

FX /FX Series Programmable Controllers
3U 3UC
Programming Manual - Basic & Applied Instruction Edition
9.7 FNC 16 – FMOV / Fill Move
Outline
This instruction transfers same data to specified number of devices.
1. Instruction format
FNC 16
D
FMOV
2. Set data
Operand Type
S
D
n
3. Applicable devices
Bit Devices
Oper-
and System User
Type
X Y M T C S D .b KnX KnY KnM KnS T C D R U \G
S
D
n
Explanation of function and operation
1. 16-bit operation (FMOV and FMOVP)
The contents of
• The contents will be same among all of "n" devices.
• If the number of points specified by "n" exceeds the device number range, data is transferred within the
possible range.
• While the command input is OFF, the transfer destination
• While the command input is ON, the data of the transfer source
234
Mnemonic
16-bit Instruction
P
FMOV
7 steps
FMOVP
Transfer source data or device number storing data
Head word device number of transfer destination (Same data is transferred from
the transfer source at one time.)
Number of transfer points [K1 ≤ n ≤ K512, H1 ≤ n ≤ H1FF]
Digit Specification
are transferred to "n" devices starting from
S
9 Move and Compare – FNC 10 to FNC 19
Operation Condition
32-bit Instruction
Continuous
13 steps
Operation
Pulse (Single)
Operation
Description
Word Devices
Special
System User
Unit
V Z Modify K H
D
does not change.
D
S
9.7 FNC 16 – FMOV / Fill Move
Mnemonic Operation Condition
DFMOV Continuous
Operation
DFMOVP
Pulse (Single)
Operation
Data Type
16- or 32-bit binary
16- or 32-bit binary
16-bit binary
Others
Con- Real Charac-
Index
stant Number ter String
E " "
.
does not change.
Pointer
P