Siemens SINUMERIK 840D sl Programming Manual page 83

Position after the end of the measuring cycle
The probe is at the distance of the selected measurement path (DFA) away from the calibration
surface.
See also
Measuring the workpiece on a machine with combined technologies (Page 250)
Procedure
The part program or ShopTurn program to be processed has been created and you are in the
editor.
Parameters
G code program
Parameters Description
Calibration data set (1 - 40)
F Calibration and measuring fee‐
drate
Measuring cycles
Programming Manual, 12/2017, 6FC5398-4BP40-6BA1
1. Press the "Meas. workpiece" softkey.
2. Press the "Calibrate probe" softkey.
3. Press the "Length" softkey.
The input window "Calibrate: Length at surface" opens.
ShopTurn program
Unit Parameters Description
- T
Distance/ D
min
β
F
CP
Z
X
Y
3.2 Measure workpiece (turning)
Name of the probe
Cutting edge number (1 - 9)
Calibration data set (1 - 40)
Tool alignment with swivel axis
● (0 degrees)
● (90 degrees)
● Value input
Calibration and measuring fee‐
drate
Positioning angle for the measur‐
ing range
Start point Z of the measurement mm
Start point X of the measurement mm
Start point Y of the measurement mm
Measuring variants
Unit
-
-
-
Degrees
mm/min
Degrees
83