Siemens SINUMERIK 840D sl Programming Manual page 63

Figure 2-13
This softkey "Select directory" only appears when "Directory" is set in the Log storage selection
field.
Figure 2-14
All drives and paths available in the program manager can be selected.
● Local drive
● NC data (part program memory)
● Network drive(s), if connected
● USB (if available)
Only a path or an available file can be selected in the dialog.
If only a path is selected, the selection with the complete path is transferred to the screen form
with the Accept softkey, but can be changed. The name of the log file is entered. If a file is
selected, the full path and file name are transferred to the screen form, but can be changed.
Alternatively, the storage location can be entered.
Measuring cycles
Programming Manual, 12/2017, 6FC5398-4BP40-6BA1
Entry level in the selection dialog for log storage
Selection dialog for log storage
Description
2.14 Miscellaneous functions
63