Resetting The Ilo; Using The Ilo Configuration Utility; Viewing Ilo Summary Information; Running An Ilo Self-Test - HPE ProLiant Gen10 User Manual

Resetting the iLO

Procedure
1. From the main Intelligent Provisioning page, click Perform Maintenance > iLO Configuration >
Reset Options.
2. Select from the following options:
• Reset iLO
• Reset to Factory Default Settings
• Clear RESTful API state

Using the iLO Configuration Utility

Use the iLO Configuration Utility to view and change iLO settings through Intelligent Provisioning, instead
of through the iLO web interface. For more information about iLO, see the HPE iLO 5 User Guide.
To refresh the screen display, press F5. It is possible that the change was being made at the same time
through the iLO web interface.
Procedure
1. On the Intelligent Provisioning home screen, click Perform Maintenance.
2. Select iLO Configuration from the maintenance options.
The iLO Configuration Utility window is displayed.

Viewing iLO summary information

Procedure
1. On the Perform Maintenance screen, click iLO Configuration.
The iLO Configuration Utility screen opens.
2. Click Summary. The following information is displayed:
• iLO Firmware Version—The version and date of the installed iLO firmware.
• FQDN—The fully qualified domain name (FQDN) of the iLO subsystem.
• iLO IPv4 Address—The network IPv4 address of the iLO subsystem
• iLO IPv6 Address—The network IPv6 address of the iLO subsystem
You can also view this information on the Overview screen in the iLO web interface. For more information,
see the HPE iLO 5 User Guide.

Running an iLO self-test

Running an iLO self-test checks the status of certain server hardware components.
40 Resetting the iLO