Installing The Steering System On The Mount - MotorGuide Tour Pro 82 Operation Maintenance Installation Warranty Manual

TROLLING MOTOR INSTALLATION AND OPERATION

Installing the Steering System on the Mount

IMPORTANT: Do not install the gas spring at this time.
1. Remove the mount from the packaging and leave the mount in the
deployed position.
2. Rest the mount on a level elevated surface such as a workbench.
3. Remove the steering assembly from the packaging.
4. Remove the plastic latch spacer from the mount.
a
b
5. Remove the Motorguide Tour mount accessory kit from the packaging.
6. Install the Allen screws on the steering system assembly.
a - Latch spacer
b - Mount
70112
16
70055
eng