TROLLING MOTOR INSTALLATION AND OPERATION
7. Push the plastic retaining washers onto the Allen screws.
a
a -
Steering assembly
b -
Plastic retaining washers
c -
Allen screws
IMPORTANT: Be careful not to pinch the stow/deploy handle and cable
between the mounting bracket and the steering system.
8. Lower the steering assembly onto the mount vertically from above while
aligning the keyways and the alignment keys.
IMPORTANT: Be certain the top of the 360 breakaway housing is aligned with
the top of the mount.
NOTE: The first Allen screw may come loose while tightening the second Allen
screw.
eng
b
c
a a
b b
70007
17
70056
a -
Keyway
b -
Alignment keyway