Table of Contents
Advertisement
TROLLING MOTOR INSTALLATION AND OPERATION
If you are having trouble syncing your remote, start with the motor unplugged
and deployed. Hold down the left arrow, right arrow, and propeller buttons at
the same time before you plug in the motor. Once the battery light turns green,
let go of the buttons and the link process should be complete.
MOUNTING ANGLE CALIBRATION
IMPORTANT: This calibration is required and must be completed. It should be
repeated when the trolling motor is moved from one boat to another. This
calibration can be done with the boat in or out of the water.
a
e
IMPORTANT: A fixed GPS position is required to complete the mounting angle
calibration. The Pinpoint GPS system will emit an audible tone once it has
acquired a fixed GPS position (in the default audio mode), and the GPS status
indicator light will illuminate on the LED dashboard located on the foot pedal.
a
1. Power up and deploy the trolling motor. Adjust the motor height so that
the bottom of the head is 15.2 cm (6 in.) above the depth collar and the
motor is clear of any obstructions while turning.
IMPORTANT: Stay a safe distance away from the propeller when the trolling
motor is in an operational mode.
eng
b
c
d
70333
a -
GPS navigation indicator light
70378
a -
Left turn
b -
Right turn
c -
Manual mode
d -
#3 button
e -
#1 button
37
Hide quick links:
Advertisement
Table of Contents
