TROLLING MOTOR INSTALLATION AND OPERATION
Adjusting the Anchor Position
b
a
d
a -
Left turn—"jog" left
b -
Increase speed—"jog" ahead
c -
Right turn—"jog" right
d -
Decrease speed—"jog" behind
Once the trolling motor is in anchor mode, the anchor position can be adjusted
by pressing the left turn, right turn, increase speed (+), or decrease speed
(–) buttons. Pressing any of these buttons once will adjust the anchor position
by five feet in the direction selected, relative to the boat's heading. For
example, pressing the + button once will move the anchor position forward of
the bow by five feet.
Avoid injury or property damage due to unintended operation. Certain objects
—especially magnetic metal objects, such as anchors—can affect the GPS
system if they are within or passing through the magnetic field surrounding
the trolling motor. Objects obstructing the GPS signal can also have a
negative effect on system operation. Be mindful of objects close to the trolling
motor, and use care when operating the trolling motor in a GPS‑guided
mode.
c
a
CAUTION
!
46
+
b
c
d
54151
eng