MotorGuide Tour Pro 82 Operation Maintenance Installation Warranty Manual page 37

TROLLING MOTOR INSTALLATION AND OPERATION
Moving parts, such as hinges and pivot points, can cause serious injury.
Keep away from moving parts when stowing, deploying, or tilting the motor.
Avoid possible serious injury from the motor dropping suddenly when
adjusting the motor depth. Firmly grasp the motor shaft with one hand when
raising or lowering the motor.
1. Release the tie‑down strap that is securing the composite shaft to the
mount.
2. Firmly grasp the stow/deploy handle.
3. Pull the latch stow/deploy handle to disengage the stow latch.
IMPORTANT: Lower the trolling motor into the water. Release the stow/deploy
handle allowing the gas spring to ease the motor into the deployed position.
IMPORTANT: Make sure the deploy latches are engaged before operating the
motor.
eng
CAUTION
!
CAUTION
!
a
70019
31
a - Stow/deploy handle