MotorGuide Tour Pro 82 Operation Maintenance Installation Warranty Manual page 49

TROLLING MOTOR INSTALLATION AND OPERATION
• The trolling motor will emit a two‑beep tone when the propeller is started,
and the propeller status indicator light on the trolling motor will illuminate.
• The trolling motor will emit a two‑beep tone when the propeller is stopped,
and the propeller status indicator light will turn off.
• The system is equipped with 20 speed levels. Press the increase speed
(+) button to increase motor speed by one level, and press the decrease
speed (–) button to reduce the motor speed by one level.
•
Holding the increase speed (+) or decrease speed (–) buttons will cause
the speed level to increase or decrease until the speed level is reached.
Holding the increase speed (+) or decrease speed (–) button for 2.5
seconds will increase the speed level from 0% to 100%, or decrease from
100% to 0%, respectively. The trolling motor will emit a two‑beep tone
when it reaches the 100% or 0% speed level.
• The trolling motor will emit a two‑beep tone if the user tries to increase or
decrease the motor speed beyond its limits.
OPERATING IN ANCHOR MODE
Anchor Mode
Anchor mode allows the boat's bow to remain in a fixed location, and will
automatically account for wind and current changes to keep the boat in the
selected location, using the trolling motor steering and speed controls. In order
for anchor mode to operate, the Pinpoint GPS system must have achieved a
fixed GPS location, indicated by the trolling motor emitting a three‑beep tone,
and when achieved the GPS status indicator light will illuminate.
Avoid serious injury from colliding with other boats, running aground, or
striking objects in the water. The Pinpoint GPS system cannot detect other
boats, shallow water, or objects in the water. Always beware of possible
obstructions to navigation when operating in any Pinpoint GPS mode.
eng
WARNING
!
43