Installing The Motor Into The Bow Mount; Removing The Motor From The Bow Mount - MotorGuide X3-40 Operation And Maintenance Manual

TROLLING MOTOR INSTALLATION AND OPERATION
4. Use four #8 x 2 in. stainless steel screws to secure the foot pedal to the
boat deck.

Installing the Motor into the Bow Mount

a
b
c
1. Turn the bracket door knob counterclockwise to loosen and open the
bracket door.
2. Place the motor column into the bracket and close the door.
3. Turn the bracket door knob clockwise to tighten the motor column in the
bracket.

Removing the Motor from the Bow Mount

1. Turn the bracket door knob counterclockwise to loosen and open the
bracket door.
2. Remove the motor column from the bracket and close the door.
eng
a - Steering tension collar
(hand‑operated models only)
b - Bracket door
c - Bracket door knob
54517
17
54589