MotorGuide Tour Pro 82 Operation Maintenance Installation Warranty Manual page 59

TROLLING MOTOR INSTALLATION AND OPERATION
Heading Lock—Compass Mode Operation
IMPORTANT: If the trolling motor loses the GPS signal while in a heading lock
mode, the trolling motor will emit an error tone, automatically return to manual
mode, and continue running at the selected speed.
If cruise control was operating while in a heading lock mode and the GPS
signal is lost, the trolling motor will emit an error tone, automatically return to
manual mode, and the trolling motor will stop.
To operate the trolling motor in the heading lock—compass mode:
1. Steer the trolling motor so that it is pointing in the desired direction of
travel.
2. Press the heading lock button on the handheld remote or foot pedal. The
trolling motor will emit an ascending chirp, indicating it's status in heading
lock—course mode.
IMPORTANT: To operate heading lock—compass mode for the first time,
press and hold the manual mode button, then press the 2, 1, 2 buttons in
sequence.
The trolling motor will maintain a constant compass heading, but the boat will
drift with the wind, tide, and current. The operator can adjust the speed and the
heading by using the handheld remote or foot pedal. In extreme current or wind
conditions, it may be necessary to increase the motor speed to maintain the
desired heading.
To exit heading lock—compass mode, press the heading lock button or the
manual mode button. The trolling motor will emit a descending chirp and the
GPS status indicator light will stop blinking.
eng
Heading lock button
53
70337