Table of Contents
Advertisement
TROLLING MOTOR INSTALLATION AND OPERATION
Avoid injury or property damage due to unintended operation. Certain objects
—especially magnetic metal objects, such as anchors—can affect the GPS
system if they are within or passing through the magnetic field surrounding
the trolling motor. Objects obstructing the GPS signal can also have a
negative effect on system operation. Be mindful of objects close to the trolling
motor, and use care when operating the trolling motor in a GPS‑guided
mode.
Setting the Anchor
Press the anchor mode button on the handheld remote or foot pedal to place
the system in anchor mode. When the anchor mode button is pressed, the
system will lock onto the fixed GPS position at the moment that the button was
pressed. The trolling motor will emit one ascending chirp to indicate its status in
anchor mode, and the GPS status indicator light will blink slowly.
While anchor mode holds the boat in the selected position, the boat may rotate
or pivot around the trolling motor's steering axis. The orientation of the boat will
follow the wind and/or current.
Exiting Anchor Mode
Exiting anchor mode from the foot pedal, press toe or heel down on the foot
pedal, press the momentary button, or press the anchor mode button again.
Exiting anchor mode using the remote, press the manual mode button or the
anchor mode button. The trolling motor will emit a descending chirp and the
GPS status indicator light on the trolling motor will stop blinking and remain on.
eng
CAUTION
!
45
Hide quick links:
Advertisement
Table of Contents
