Product Installation, Wiring, And Battery Information; Installing The Trolling Motor - MotorGuide Xi3-70 SW GPS Operation, Maintenance & Installation Manual

PRODUCT INSTALLATION, WIRING, AND BATTERY

Installing the Trolling Motor

1. Remove the side panel screw from each side of the deck mount. Gently
pull the side panels away from the deck mount, taking care not to damage
the locating tabs, and remove the side panels from both sides of the
trolling motor.
a
a - Locating tabs
b - Side panel screw
2. If you are replacing an existing MotorGuide or competitive brand trolling
motor on your current boat, check if the existing mounting holes align with
the new deck mount before drilling new holes. Ensure that the mounting
location meets the requirements listed in Step 4.
3. If new holes are not required to mount the trolling motor, skip ahead to
Step 7.
4. Carefully select an appropriate area on the deck of the boat close to the
centerline to install the trolling motor. Ensure that the forward mounting
bolts will not penetrate the hull. Have an assistant hold the trolling motor
in position while the mounting location is being selected.
IMPORTANT: The mounting position must be tested in the stowed and
deployed positions before drilling the mounting holes.
IMPORTANT: Ensure that the head does not protrude beyond the beam of the
boat when in the stowed position.
INFORMATION
a
b
64678
8
eng