Table of Contents
Advertisement
TROLLING MOTOR INSTALLATION AND OPERATION
Changing the Heading Lock Mode
Heading lock—course mode is the default heading lock mode. To switch to
heading lock—compass mode, press and hold the manual mode button, then
press the 2, 1, 2 buttons in sequence. To switch back to heading lock—course
mode, press and hold the manual mode button, then press the 2, 1, 1 buttons
in sequence.
IMPORTANT: The Pinpoint GPS system will remember which heading lock
mode was last used, and the next time the heading lock button is pressed, the
trolling motor will operate that mode.
OPERATING IN HEADING LOCK—COMPASS MODE
When heading lock—compass mode is selected, the trolling motor will lock in
the trolling motor's compass heading and drive the boat along that heading.
The boat will drift with the wind, tide, and current, but the trolling motor will
maintain a constant compass heading. The operator can adjust the speed and
the heading by using the handheld remote or the foot pedal as described
above.
Avoid serious injury from colliding with other boats, running aground, or
striking objects in the water. The Pinpoint GPS system cannot detect other
boats, shallow water, or objects in the water. Always beware of possible
obstructions to navigation when operating in any Pinpoint GPS mode.
a
h
g
f
WARNING
!
a -
Heading lock
b -
Increase speed (+)
b
c -
Right turn
d -
Manual mode
c
e -
Decrease speed (–)
f -
Button 2
d
g -
Button 1
e
h -
Left turn
61242
52
eng
Hide quick links:
Advertisement
Table of Contents
