Table of Contents
Advertisement
TROLLING MOTOR INSTALLATION AND OPERATION
•
The trolling motor will emit a three‑beep tune once it has acquired a fixed
GPS position, and the GPS status indicator light will illuminate.
NOTE: Areas near the North and South poles, remote Northern areas, bridges,
severe weather, mountain ranges, and other large obstructions may affect the
GPS signal strength.
OPERATING IN MANUAL MODE
In manual mode, the trolling motor operates like a conventional trolling motor. It
allows the operator to manually control the direction of travel and thrust level of
the trolling motor, using the directional controls on the handheld remote foot
pedal. Refer to the following illustration and instructions to operate the trolling
motor in manual mode with the handheld remote.
Once the trolling motor is powered up, it is ready to operate in manual mode.
Manual mode is the default mode after power‑up, and also if the GPS signal is
lost while in a GPS operating mode. If the GPS signal is lost, the GPS indicator
light will turn off. The trolling motor will emit one beep to indicate its status in
manual mode. To enter manual mode from another mode, press the manual
mode button.
b
a
Turning the Handheld Remote On or Off
The handheld remote is always on, and is ready for use anytime that the trolling
motor is powered up and in the deployed position.
Steering
•
To turn left, press the left turn button on the handheld remote.
•
To turn right, press the right turn button on the handheld remote.
•
The available steering range allows the trolling motor to turn beyond 180°
for operation in reverse.
Speed Control
•
Press the propeller on/off button once to start the propeller, and press
the propeller on/off button again to stop the propeller.
c
a -
Left turn
b -
Propeller on/off
c -
Increase speed
d -
Right turn
d
e -
Manual mode
e
f -
Decrease speed
f
53017
42
eng
Hide quick links:
Advertisement
Table of Contents
