Table of Contents
Advertisement
TROLLING MOTOR INSTALLATION AND OPERATION
Speed Control
All Tour Pro motors are equipped with digital variable speed control. Control the
speed of your motor by rolling the speed control knob with your hand or foot
until you reach the desired speed.
a
c
a -
Momentary switch
b -
Foot pedal
c -
Speed control knob
•
Speed control knob: Digital variable speed settings are numbered 0–10,
and allow you to select any speed from 0–10, and stop the motor.
•
Momentary switch: The momentary switch is located on the top right
corner of the foot pedal. The momentary switch works in conjunction with
the on/off/pedal switch when it is in the pedal position. When the
momentary switch is pressed, the motor will run at the selected speed as
long as the switch is pressed.
Tour Pro Pedal Resistance Settings
The user can manually adjust the pedal resistance to feel looser or tighter
based on user preferences. Press and hold the Manual Mode button and press
2,3,1 for the lightest setting up to 2,3,5 which is the heaviest or most resistant
setting. settings are 1 ‑ 5.
•
1: 2, 3, 1 ‑ Least resistant, lighter feel.
•
2: 2, 3, 2
•
3: 2, 3, 3
•
4: 2, 3, 4
eng
b
61
70342
Hide quick links:
Advertisement
Table of Contents
