Encoder Interface (Htl/Ttl/Ssi) - Siemens SIMOTION D410 Manual

Interfaces

4.6 Encoder interface (HTL/TTL/SSI)

Interface characteristics
Table 4-10
Characteristic
Connector type
Cable type
Maximum cable length
Minimum transmission cycle 0.5 ms
Autocrossing
Interface assignment
Table 4-11 Assignment of ports X200 - X201
Representation
Connectable devices
The following devices can be connected to the PROFINET interface:
● PG/PC programming devices (communication with SIMOTION SCOUT / STEP 7 and HMI)
● SIMATIC HMI devices
● Distributed I/O
● Other SINAMICS drive units (e.g., CU310 PN or CU320 with CBE20)
See also
Connecting the PROFINET interface (D410 PN only) (Page 82)
4.6 Encoder interface (HTL/TTL/SSI)
The HTL/TTL/SSI encoder interface is used to connect external encoders.
52
Ports X200 and X201
Type
RJ45 socket connector
PROFINET
100 m
Yes
i.e. both crossed and uncrossed cables can be used
Pin Name
1 TXP
2 TXN
3 RXP
4 Reserved, do not use
5 Reserved, do not use
6 RXN
7 Reserved, do not use
8 Reserved, do not use
Description
Transmit data +
Transmit data -
Receive data +
Receive data -
SIMOTION D410
Manual, 04/2014