Profibus Dp Interface (Simotion D410 Dp Only) - Siemens SIMOTION D410 Manual

Figure 4-3
Additional information
For information on the components that can be connected via DRIVE-CLiQ (setup, connection,
configuration, etc.) see
●
●
●
●
●
●
●
4.4

PROFIBUS DP interface (SIMOTION D410 DP only)

SIMOTION D410 DP provides one interface to connect to PROFIBUS DP. The interface can
be run asynchronously or isochronously.
A baud rate of up to 12 Mbit/s can be set for the PROFIBUS DP interface.
SIMOTION D410
Manual, 04/2014
Example topology: 3 Terminal Modules, 1 CUA31, 1 encoder via motor with DRIVE-CLiQ
interface, 1 encoder via SMx
SINAMICS S120 Control Units and Additional System Components Manual
SINAMICS S120 for AC Drives Manual
SINAMICS S120 Commissioning Manual
SINAMICS S120 Booksize Power Units Manual
SINAMICS S120 Safety Integrated Function Manual
TM15/TM17 High Feature SIMOTION Terminal Modules Commissioning Manual
SIMOTION Terminal Modules TM15 / TM17 Manual
4.4 PROFIBUS DP interface (SIMOTION D410 DP only)
Interfaces
49