Clock - Mitsubishi Electric 800 Series Instruction Manual

7.1

Clock

The time can be set. The time can only be updated while the inverter power is ON.
Pr. Name
1006
Clock (year) 2000 (year)
E020
1007 Clock (month,
101 (January 1)
E021 day)
1008 Clock (hour,
0 (00:00)
E022 minute)
*1 The setting range is "2010 to 2099" when the CC-Link IE TSN communication is used for time synchronization.
 Simple clock function
• When the current year, month, day, hour and minute are set in the parameters above, the inverter internal clock starts
ticking. The set date and time can be checked by reading the parameters.
NOTE
• The time data of the internal clock is saved in the inverter's EEPROM every 10 minutes.
• The clock does not run while the control circuit power is OFF. The clock needs to be set every time after turning ON the inverter
power.
 Time synchronization via CC-Link IE TSN communication (Ethernet
model)
• The internal clocks of connected devices on the CC-Link IE TSN Network can be synchronized.
NOTE
• The clock of the inverter is adjusted every minute according to the received clock data. (The clock of the inverter is not
synchronized when the received clock data is out of range.)
• For information about sending clock data, refer to the Instruction Manual of the CC-Link IE TSN master module.
Initial value Setting range
*1
2000 to 2099
101 to 131, 201 to 228, (229), 301 to 331,
401 to 430, 501 to 531, 601 to 630, 701 to
731, 801 to 831, 901 to 930, 1001 to
1031, 1101 to 1130, 1201 to 1231
0 to 59, 100 to 159, 200 to 259, 300 to
359, 400 to 459, 500 to 559, 600 to 659,
700 to 759, 800 to 859, 900 to 959, 1000
to 1059, 1100 to 1159, 1200 to 1259,
1300 to 1359, 1400 to 1459, 1500 to
1559, 1600 to 1659, 1700 to 1759, 1800
to 1859, 1900 to 1959, 2000 to 2059,
2100 to 2159, 2200 to 2259, 2300 to 2359
Description
Set the year.
Set the month and day.
1000's and 100's digits: Month (1 (January) to
12 (December)).
10's and 1's digits: Day (1 to the last day of the
month (28, 29, 30, or 31)).
For December 31, set "1231".
Set the hour and minute using the 24-hour
clock.
1000's and 100's digits: 0 to 23 hours,
10's and 1's digits: 0 to 59 minutes.
For 23:59, set "2359".
7. (E) Environment Setting Parameters
1
2
3
4
5
6
7
8
9
10
127
7.1 Clock