Mitsubishi Electric 800 Series Instruction Manual page 178

 Operation mode switching method
When "0, 1, or 2" is set in Pr. 340
Switching through the network
Switch to External
operation mode through
the network.
Network operation
When "10 or 12" is set in Pr. 340
Network operation
NOTE
• For details on switching by external terminals, refer to the following pages.
PU operation external interlock (X12
PU/External operation switchover (X16
PU/NET operation switchover (X65 signal), External/NET operation switchover (X66
Pr.340 Communication startup mode
External operation
Switch to the Network operation
mode through the network.
Press on the PU to light
Press on the PU to light
signal)page 180
signal)page 181
selectionpage 184
Switching with the PU
Press
the PU to light
Press on
the PU to light
9. (D) Operation Command and Frequency Command
on
PU operation
PU operation
signal)page 182
9.1 Operation mode selection
1
2
3
4
5
6
7
8
9
10
177