Mitsubishi Electric 800 Series Instruction Manual page 407

17.3
Parameters (functions) and instruction codes
under different control methods
*1 Instruction codes are used to read and write parameters in accordance with communication (such as the Mitsubishi inverter protocol). (For details
of communication, refer to the Instruction Manual (Communication).)
*2 Function availability under each control method is shown as follows:
○: Available
×: Not available
Δ: Available with some restrictions
*3 For Parameter copy, Parameter clear, and All parameter clear, ○ indicates the function is available, and × indicates the function is not available.
*4 Communication parameters that are not cleared by parameter clear or all parameter clear (H5A5A or H55AA) via communication. (For details of
communication, refer to the Instruction Manual (Communication).)
*5 When a communication option is installed, parameter clear (lock release) during password lock (Pr.297 Password lock/unlock ≠ "9999") can be
performed only from the communication option.
Notation
Mark
Available for the FM type inverter (standard model).
Available for the AM (50 Hz) type inverter (standard model).
Available for the AM (60 Hz) type inverter (standard model).
Available for the Ethernet model.
Available for the Protocol group A (Ethernet model).
Pr.
0 Torque boost
1 Maximum frequency
2 Minimum frequency
3 Base frequency
4 Multi-speed setting (high speed)
5 Multi-speed setting (middle speed)
6 Multi-speed setting (low speed)
7 Acceleration time
8 Deceleration time
9 Electronic thermal O/L relay
10 DC injection brake operation frequency
11 DC injection brake operation time
12 DC injection brake operation voltage
13 Starting frequency
14 Load pattern selection
15 Jog frequency
16 Jog acceleration/deceleration time
17 MRS/X10 terminal input selection
18 High speed maximum frequency
19 Base frequency voltage
20 Acceleration/deceleration reference frequency
21 Acceleration/deceleration time increments
22 Stall prevention operation level (Torque limit level) 16
Stall prevention operation level compensation
23
factor at double speed
24 Multi-speed setting (speed 4)
25 Multi-speed setting (speed 5)
26 Multi-speed setting (speed 6)
27 Multi-speed setting (speed 7)
406
17. Appendix
17.3 Parameters (functions) and instruction codes under different control methods
Description
Name
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
10
11
12
13
14
15
17
18
19
1A
1B
Mark
Available for the 200 V class inverters.
Available for the 400 V class inverters.
Available when the FR-A8AX is installed.
Available when the FR-A8AY is installed.
Available when the FR-A8AR is installed.
Available when the FR-A8NC is installed.
Instruction
Control method
*1
code
80 0 ○ ×
81 0 ○ ○
82 0 ○ ○
83 0 ○ ×
84 0 ○ ○
85 0 ○ ○
86 0 ○ ○
87 0 ○ ○
88 0 ○ ○
89 0 ○ ○
8A 0 ○ ○
8B 0 ○ ○
8C 0 ○ ○
8D 0 ○ ○
8E 0 ○ ×
8F 0 ○ ○
90 0 ○ ○
91 0 ○ ○
92 0 ○ ○
93 0 ○ ×
94 0 ○ ○
95 0 ○ ○
96 0 ○ ○
97 0 ○ ○
98 0 ○ ○
99 0 ○ ○
9A 0 ○ ○
9B 0 ○ ○
Description
*2
Sensorless Sensorless Sensorless PM PM PM
× × × ○
○ ○ ○ ○
○ ○ ○ ○
× × × ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
× × × ○
○ ○ ○ ○
× × × ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
× × × ○
○ ○ ○ ○
○ ○ ○ ○
○ × ○ ○
× × × ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
Parameter
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○