Menu Commands Of The Ctel Master Module On The Handheld - Festo CPX-CTEL4-M12-5POL Manual

3. Commissioning

3.7.1 Menu commands of the CTEL master module on the Handheld

System Overview
CPX terminal
0: ... Module ...
1: ... Module ...
2: CTEL I-port master...
3: ... Module ...
...
1
Menu "Monitoring/Forcing" menu (also "Fail safe", "Idle mode"),
see section 3.7.2
2
"Parameters" menu, see section 3.7.3
Fig. 3/1: Menu of the CTEL master module on the Handheld
3-24
Fig. 3/1 shows as an example the special menu structure for
the CTEL master module. For reasons of clarity, only the para-
meter name is shown for the parameters.
2:CTEL
Monitoring/Forcing (M)
Diagnostics (D)
Parameters (P)
Fail safe (F)
Module data (MD)
1
2:CTEL:M
Process state
...
...
...
2
2:CTEL:P
I-port 1 configuration: ...
I-port 2 configuration: ...
I-port 3 configuration: ...
I-port 4 configuration: ...
CTEL I/O mode: ...
CTEL I/O length: ...
Behaviour after I-port SC:
...
Device parameter I-port 1:
• Byte 1..0: 0x...
• Byte 3..2: 0x...
• Byte 5..4: 0x...
...
Festo P.BE-CPX-CTEL-EN en 1205NH