Connection With The Host System; Ensuring Protection Class Ip65/67 - Festo CPX-CTEL4-M12-5POL Manual

2. Installation
2.6

Connection with the host system

2.7

Ensuring protection class IP65/67

2-20
For the required connection between the CTEL master module
in the CPX terminal and the higher-order host system, it is
required that the configuration file that corresponds to the
current configuration presetting of the CTEL master module is
selected in the host system. Only in this case is the CTEL mas-
ter module correctly recognised when the system is run up.
Otherwise, no communication can be built up and no dia-
gnostics/error message is output.
The possible configurations correspond to the description in
section 1.4.1.
Note
To comply with protection class IP65/IP67:
Seal unused I-ports with corresponding protective caps
•
(accessories, not included in scope of delivery, see ap-
pendix A.3).
Festo P.BE-CPX-CTEL-EN en 1205NH