Parameters - Festo CPX-CTEL4-M12-5POL Manual

3. Commissioning
3.6

Parameters

3.6.1 Overview of module parameters
Relative R/ Bit
Address W 7
Mod. par.
0 RW
6 RW
3-16
The CTEL master module can be adapted to the respective
use situation through the configuration of various parame-
ters.
In addition, read-only parameters are available for reading
out system statuses.
The following table includes an overview of the user-relevant
module parameters. The standard settings are shown in bold
characters.
Bit Bit Bit Bit
6 5 4 3
X
X
Bit Bit Bit Module parameter
2 1 0
Monitoring V
0=inactive
X
1=active
Error control per I-port:
X I-port 1 configuration
X I-port 2 configuration
I-port 3 configuration
I-port 4 configuration
00=Use existing device
01=Expect device
10=Port inactive
/V
OUT VAL
Festo P.BE-CPX-CTEL-EN en 1205NH