Instructions On Operation - Festo CPX-CTEL4-M12-5POL Manual

3. Commissioning
3.5

Instructions on operation

Festo P.BE-CPX-CTEL-EN en 1205NH
Warning
Accidental interchange of the connected I-port devices.
Caution with subsequent modification of the I-port assign-
ment:
Make sure that devices are not separated from one
•
I-port and accidentally connected to another I-port. Use
the identification labels (type IBS-6x10 or IBS-9x20) in
order to identify modules uniquely.
Before starting the system, check whether the I-port
•
assignment corresponds to the configuration in the host
system.
You can thereby avoid:
– unintended movements of actors.
Warning
Accidental activation of actuators!
An incorrect status of the valves and outputs can lead to
dangerous situations!
Make sure that valves and outputs are put into a safe
•
state when malfunctions occur.
Note
Please note the following if the outputs of a valve terminal
are reset after master stop, fieldbus interruption or malfunc-
tion:
– Single-solenoid valves move to the normal position
– Double-solenoid valves remain in the current position
– Mid-position valves go into mid-position (pressurized,
exhausted or closed, depending on valve type).
3-15