Table of Contents
Advertisement
3.
Confirm the Weld Assist's recommendation for welding settings by selecting 'Apply'.
Weld Assist automatically sets the following parameter for you:
• Current: 3 ... 300 A
The parameter can still be modified as per normal for the actual welding.
Weld Assist gives you a recommendation for these:
•
Shielding gas flow
•
Electrode: Diameter
•
Filler (if used): Material and diameter
•
Number of passes: Number and/or visualization
•
Travel speed: mm/min.
3.2.3 Memory channels view
Memory channel is a place to store predefined welding parameter settings for future use. A welding machine can
include a number of preset and user-defined channels.
In the Channels view, the selections are made with the control knob (1):
© Kemppi
27
Master 315
Operating manual - EN
1921530 / 2052
Advertisement
Table of Contents
