Call Park - Alcatel-Lucent H2 DeskPhone User Manual

H2 DeskPhone
H2P DeskPhone

8.14 Call park

A call park requires server support. Consult your system administrator for support.
When you are on the call, if it is not convenient to answer the telephone at that time, you can press the
configured Park button to hold the call. After a successful park, you can resume the call by pressing the
configured Park button on other devices.
Set the Call Park button:
⚫ Telephone interface: Long press a function key to enter the function key Settings interface, and set the
key function type as Memory Key and subtype as Call Park, set the values for the server call park
number, and set up the corresponding SIP lines.
⚫ WEB interface: Log in to the telephone page, enter the [Function Key] >> [Function Key] page, select
a DSSkey, set the key function type as Memory Key and subtype as Call Park, set the value as the call
park number of the server, and set up the corresponding SIP line.
8AL90394ENAAed01
Figure 43 – Setting Call Park in telephone
Figure 44 - Setting Call Park in web
41 /111