Alcatel-Lucent H2 DeskPhone User Manual page 73

H2 DeskPhone
H2P DeskPhone
Information
Download Common
Config enabled
Enable Server Digest
DHCP Option
Option Value
Custom Option Value
Enable DHCP Option 120
SIP Plug and Play (PnP)
Enable SIP PnP
Server Address
Server Port
Transport Protocol
Update Interval
Static Provisioning Server
Server Address
Configuration File Name
Protocol Type
Update Interval
Update Mode
TR069
Enable TR069
8AL90394ENAAed01
is kept, the information will be kept.
Whether the telephone will download the common configuration file.
When this feature is enable, if the configuration of the server is changed,
the telephone will download and update.
Configuring the DHCP option: The DHCP option supports the DHCP custom
option | DHCP option 66 | DHCP option 43, i.e., 3 methods to get the
provision URL. The default is Option 66.
A Custom option value from 128 to 254 is allowed. The option value must
be the same as the one defined by the server.
Use Option 120 to get the SIP server address from the DHCP server.
Whether PnP is enabled or not. If PnP is enabled, the telephone will send a
SIP SUBSCRIBE message by broadcast method. Any server that can
support the feature will respond and send a notification with URL to the
telephone. This enables the telephone to get the configuration file with the
URL.
Broadcast address. Default is 224.0.0.0.
PnP port
PnP protocol, TCP or UDP.
PnP message interval.
Provisioning server address. Supports both IP address and domain
address.
The configuration file name. If it is empty, the elephone will request the
common file and device file which is named as its MAC address.
The file name could be a common name such as $mac.cfg, $input.cfg. The
file format supports CFG/TXT/XML.
Transfer protocol type: supports FTP、TFTP、HTTP and HTTPS
Configuration file update interval time. The default is 1. This means that the
telephone will check the update every 1 hour.
Provision Mode.
1. Disabled.
2. Update after reboot.
3. Update after interval.
Enable TR069 after selection.
73 /111