Answering Calls; Communication - Alcatel-Lucent H2 DeskPhone User Manual

H2 DeskPhone
H2P DeskPhone
◼ Open audio channel then dial the number
Another alternative is the traditional way in which the user first opens the audio channel by lifting the
handset, or by pressing the hands-free button, or pressing the line key, and then dialing the number. When
completing the number, the user can press the [Dial] button or the [OK] button to call out. The number can
also be dialed out automatically after a timeout.
◼ Cancelling a call
While calling the number, the user can stop the audio channel by putting back the handset, pressing the
hands-free button or pressing the [End] button to drop the call.

8.2 Answering calls

When there is an incoming call, the user will see the following incoming call on the screen.
The user can answer the call by lifting the handset, pressing the hands-free button, or pressing the [Answer]
button. To reject the incoming call, the user should press the [More] and then the [Reject] button.

Communication

8.2.1
When the call is connected, the user will see a communication mode screen as in the figure below.
8AL90394ENAAed01
Figure 14 - Open the voice channel and dial the number
Figure 15 - Call number
Figure 16 - Answering calls
Figure 17 - Communication interface
29 /111