H2 DeskPhone
H2P DeskPhone
8.15
Pick up
Pick up requires server support. Consult your system administrator for support.
You can use the Pick Up function to answer incoming calls from other users. The telephone can pick up
incoming calls by configuring the DSSkey for BLF and setting the Pick Up code.
Telephone interface: Long press the line key to enter the [DssKey] setting interface, and select a Dsskey to
set.
⚫
Set the line, function key type as Memory Key, subtype as BLF/NEW CALL, subscription number, and
pick up code
⚫
Other telephones call the subscription number, and the opposite end is in the incoming ring.
⚫
Press the DSS key to pick up the telephone.
⚫
The caller picks up the call and speaks.
WEB interface: Log in to the telephone web page, enter the [Function Key] >> [Function Key] page, select a
DSSkey, set the memory key type as Memory Key, the subtype as BLF/NEW CALL, and set up the
corresponding SIP line and Pick Up codes.
8AL90394ENAAed01
Figure 45 – Setting Pick Up on the telephone
Figure 46 – Setting Pick Up on the web
42 /111